Incoloy Buttweld Pipe Fittings Supplier
Incoloy Buttweld Pipe Fittings, ANSI B16.9 Incoloy 800H Buttweld Fittings, Incoloy N08811 Welded Pipe Fittings, Incoloy Alloy Seamless Pipe Fittings, Alloy 800HT Pipe Fittings, Incoloy Alloy 1.4876 Pipe Fittings, Alloy N08825 Seamless Pipe Fittings, Incoloy Pipe Fittings Manufacturer in Mumbai India
- What is Incoloy Pipe Fittings
- Specification of Incoloy Buttweld Pipe Fittings
- Types of Incoloy Butt weld Fittings
- Incoloy Alloy Butt weld Fittings Equivalent Grades
- Make of Incoloy Pipe Fittings
- People Search for Incoloy Buttweld Fittings
Table of Content
Incoloy Pipe Cap, Nickel Alloy N08811 Pipe Bend, ASTM B366 Alloy 800 Buttweld Tee Exporter, Incoloy 800HT Buttweld Cross, Alloy N08825 Stub End, Incoloy Alloy Buttweld Fittings, Incoloy® Alloy Buttweld Pipe Elbow Supplier, Incoloy Reducer in Mumbai India.
Ambuja Steel & Engg Co is a well-known leader in supplying Incoloy Alloy Pipe Fittings, which is a nickel-iron-chromium alloy. We also offer these products in different types such as Incoloy 800 Pipe Fittings, Incoloy 800H Pipe Fittings, Incoloy 800HT Pipe Fittings, Incoloy 825 Pipe Fittings, Incoloy 925 Pipe Fittings, and so on. Annealing after cold work hardening may be required in Incoloy Butt Weld Fittings, where if so, then just anneal at 1800 Degree F for 15 minutes at temperature and air cool. Incoloy Tee Pipe Fittings is used for industrial furnaces, pressure vessels, heat exchangers, transfer piping, catalyst tubes, and components in coal conversion plants. Soft die materials (bronze, zinc alloys, etc.) minimize galling in Incoloy Elbow Pipe Fittings and produce good finishes, but die life is somewhat short. Incoloy Cross Pipe Fittings is solution annealed at 980 Degree C, then rapidly cooled, where appreciable grain growth will occur if this temperature is exceeded. The higher strength of Incoloy Reducer Pipe Fittings results from close control of the carbon, aluminum, and titanium contents in conjunction with a high-temperature anneal. Incoloy Bend Pipe Fittings is resistant to oxidation and carburization in high temperature environments, where high - speed operations such as grinding, turning, or milling, are performed using water - base coolants. Incoloy End Cap Pipe Fittings is typically used for applications involving long-term exposure to high-temperatures where resistance is needed from oxidation, carburization and other types of high-temperature corrosion.
Specification of Incoloy Buttweld Pipe Fittings
Specifications: ASTM B366 / ASME SB366
Standard : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Type : Seamless / Welded / Fabricated
Items : Seamless & Welded Pipe Fittings, 45 Deg & 90 Deg Butt weld Elbow, Pipe Tee, Cross, Reducer, Pipe End Cap, Swage Nipple etc.
Grade : Incoloy UNS (N08800, N08810, N08811, N08825), DIN (1.4876, 1.4958, 1.4859, 2.4858)
Equivalent Grades of Incoloy Butt weld Fittings
| STANDARD | WNR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 800 | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | - | X8NiCrAlTi32-21 | XH32T |
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Chemical Composition of Incoloy Butt weld Fittings
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60ᴬ | 0.15 – 0.60ᴬ |
| 825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Mechanical properties of Incoloy Butt weld Fittings
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 800 / 800H / 800HT | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
| 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Export Destinations for Incoloy Buttweld Pipe Fittings
|
MIDDLE EAST Saudi
Arabia |
AFRICA Nigeria NORTH AMERICA USA |
EUROPE Russia |
ASIA India SOUTH AMERICA Argentina |
